• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

2.8 V6 StraightBack Headers with Ball & Socket PIC'd
Fuel block plate & Upper Gas Pedal Rod 2.8 V6 in Alpine
2.8 Header with recommended emission port filled, drilled, tapped to 10mm 1.5 threads which secures the bottom flange from exhaust leakage.
2.8 Heads modified flange
2.8 V6 StraightBack Headers with Ball & Socket PIC'd
2.8 V6 StraightBack Headers
2.8 V6 StraightBack Headers
2.8 V6 StraightBack Headers
DanR

2.8 V6 StraightBack Headers with Ball & Socket PIC'd

Designed for your V6 Converted Alpine similar to the Tiger. Header flanges are 3/8 thick; 1 5/8" tubes; 3 into 1 Collector 2 1/4 dia. Header flanges are special laser cut for best of fit, slotted for additional bolt/studs to secure the bottom of the flanges. PIC'D also is the Tranny Mount Bracket.
Click to expand...
DanR
I did not explain above, the Collector is approximately 10" in length as recommended by Sven Pruitt in his Book.

Also, as you can see the Transmission bracket is one piece formed in a hyd press and allows plenty of room for routing the exhaust....
 

Media information

Category
DarkSider Gallery
Added by
DanR
Date added
View count
1,094
Comment count
1
Rating
0.00 star(s) 0 ratings

Share this media

Top