1. Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.


    Dismiss Notice

Wheel Studs

Discussion in '"Stock" Alpine' started by Eleven, Aug 27, 2020.

  1. Eleven

    Eleven Platinum Level Sponsor

    I am getting close to converting my wires to solid wheels. I thought I saw a post once that mentioned a specific spline (right word?) pattern for the part of the stud that inserts into the hub. I have to buy all new studs. is there something I need to look for?
  2. alpine_64

    alpine_64 Donation Time

    There was a moroso part number on the forum archive for the correct thread pitch and size and knurled end that goes into the hub..

    Buy longer than stock length...if you want to run spacers on the rear or the wheels have a thick hub the factory length sometimes is marginal with how many turns of the thread the nuts can get.
    Last edited: Aug 31, 2020
  3. Eleven

    Eleven Platinum Level Sponsor

    Thank you; that is what I needed to know. Much appreciated.

Share This Page