Various V6 Bits

[Alpine 1789]

I came across a couple of hard to find V6 bits on eBay:

Original Ford Clutch Pressure Plate: http://www.ebay.com/itm/NOS-1975-19...ATE-/351492581255?hash=item51d6972787&vxp=mtr

And the matching Ford Clutch Disk: http://www.ebay.com/itm/NOS-1975-19...RIG-/371421684744?hash=item567a752408&vxp=mtr

$190 for the set doesn't seem like too bad a deal to me.

Also, how about a set of ARP Rod bolts: http://www.ebay.com/itm/ARP-ROD-BOL...740-/191673766805?hash=item2ca0a59395&vxp=mtr

And, finally, I don't remember how to tell if this is the right EEC module, but here is an '83 Ranger engine control module and wiring harness: http://www.ebay.com/itm/EEC-IV-Syst...ine-/271968532697?hash=item3f529678d9&vxp=mtr

No connection, etc.

 

[MikeH]

I came across a couple of hard to find V6 bits on eBay:

Original Ford Clutch Pressure Plate: http://www.ebay.com/itm/NOS-1975-19...ATE-/351492581255?hash=item51d6972787&vxp=mtr

And the matching Ford Clutch Disk: http://www.ebay.com/itm/NOS-1975-19...RIG-/371421684744?hash=item567a752408&vxp=mtr

$190 for the set doesn't seem like too bad a deal to me.

Also, how about a set of ARP Rod bolts: http://www.ebay.com/itm/ARP-ROD-BOL...740-/191673766805?hash=item2ca0a59395&vxp=mtr

And, finally, I don't remember how to tell if this is the right EEC module, but here is an '83 Ranger engine control module and wiring harness: http://www.ebay.com/itm/EEC-IV-Syst...ine-/271968532697?hash=item3f529678d9&vxp=mtr

No connection, etc.

I believe the 289 rod bolts will work as well. I recall seeing that somewhere.

 

[V6 JOSE]

Hi Mike,

That´s what I used in my turbo motor. The only thing about it, is that you end up with four extra bolts if you buy the kit.

Jose

I believe the 289 rod bolts will work as well. I recall seeing that somewhere.

 

[MikeH]

Hi Mike,

That´s what I used in my turbo motor. The only thing about it, is that you end up with four extra bolts if you buy the kit.

Jose

So you get together with 3 other people and buy 3 kits to get 4 sets.