1. Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible.

    Enjoy.

    Dismiss Notice

Tiger transmission mount bracket

Discussion in 'Sunbeam Tiger' started by DanR, Feb 17, 2018.

  1. DanR

    DanR SAOCA Treasurer Diamond Level Sponsor

    For those Tiger guys wanting to keep their tiger original or appearing original and for those guys building an Alger, I have utilized an Original Tiger Transmission Mount Bracket as a pattern to reproduce a clone.

    My Engineer/Draftsman has made drawings, then Laser cut pieces, built a Jig for Tig welding an exact duplicate of the Tiger bracket. They are now available $200. + shipping.

    I believe they can be utilized in several "builds" where the V8's are installed. Might even be useful in some "other" type conversions because of the fitment in the front portion of the "X" Frame of the Alpine.
     

    Attached Files:

  2. SIVAllan

    SIVAllan Donation Time

    Nice work!

    I hope you've put a note on the C.A.T. forum as well.
     
  3. DanR

    DanR SAOCA Treasurer Diamond Level Sponsor

    Tiger Transmission Bracket Fab'd by DanR Powder Coated 20180327_104509.jpg Fabricated to the exact dimensions as the Original. Final product for your enjoyment!
     
  4. 67basket_case

    67basket_case Donation Time

    Hey DanR you still making these?
     
  5. DanR

    DanR SAOCA Treasurer Diamond Level Sponsor

    Yep! I am continuing to have them produced for the Sunbeam Tiger and Alpine "Alger" projects too!

    Liking them so well, I have decided to give them a try in my next V6 conversion. If the straight back headers I designed are utilized, it is a natural run for the exhaust system to go thru the X frame like the Tiger system. Take a good look at the PIC in the 1st POST in this thread and you will see the routing of the exhaust piping and mufflers.

    With the "Tiger" Tranny Bracket I am going to try the cross-over tubing also in the next V6 project.

    Price is still $200 plus shipping.
     
    Last edited: May 8, 2019

Share This Page