-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
steering column gasket
- Thread starter birdfan56
- Start date
Tim R
Silver Level Sponsor
Hi, If you remove the steering column parts that are inside the cabin of the car you should be able to put the gasket ring on the column and work it down and into position engaging the lip with a small screwdriver without undoing the connections to the relay arm etc.
On our cars we add additional sound proofing on the firewall inside the car when doing the final trimming and we add further additional soundproofing around the column itself inside the original firewall gasket. The aim being to completely seal and separate the under bonnet area from the cabin and thereby reduce noise (or fumes, smells etc.)
Tim R
On our cars we add additional sound proofing on the firewall inside the car when doing the final trimming and we add further additional soundproofing around the column itself inside the original firewall gasket. The aim being to completely seal and separate the under bonnet area from the cabin and thereby reduce noise (or fumes, smells etc.)
Tim R
