• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

SIV Intake Studs

Steeman01

Steeman01

Donation Time
Hey everyone, are the studs that are on the SIV intake a simple threaded stud (i.e. removable)? They look like it, but before I try to remove them, I wanted to ask.

I bought a 14 mm spacer, but the studs are too short. Before I have to go and get a 7 mm spacer, I would much prefer to put slightly longer studs on to accommodate the 14 mm (1/2") spacer.

Thanks!
 
Last edited:
sunalp

sunalp

Diamond Level Sponsor
They do screw out. Just be careful not to strip them taking them out. They are steel and of course the
head is aluminum so they tend to corrode. Use some heat if they're really tight.

Hope that help,
Steve
 
alpine_64

alpine_64

Donation Time
If putting in new studs add some of the antiseeze compund... While you hope never to have to take them out again... You never know
 
You must log in or register to reply here.
Top