• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Shift Boot

bkasl

bkasl

Donation Time
Having problems with lip of gear shift rubber boot staying below carpet. Any ring that can be attached to keep in place?
 
alpine_64

alpine_64

Donation Time
Brent there should be a recess in the base of the boot that goes over the edge of the hole in the metal shift cover that secures it... Also there are 2 styles of boot...not sure if that makes a difference as to how they stay on or not...
 
sunalp

sunalp

Diamond Level Sponsor
I've had luck with a strong glue, glueing it to the hole in the metal cover. Done it a few times and
it's still holding years later.
 
bkasl

bkasl

Donation Time
alpine_64 said:
Brent there should be a recess in the base of the boot that goes over the edge of the hole in the metal shift cover that secures it... Also there are 2 styles of boot...not sure if that makes a difference as to how they stay on or not...
Click to expand...
So both of our boots have a double round ring on the bottom, I am missing a metal ring fitting between the two sections under the carpet?
 
You must log in or register to reply here.
Top