-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
1985 Hyundai Pony Master Cylinder Push Rod
- Thread starter Rockonp04
- Start date
260Alpine
Silver Level Sponsor
Make your own custom rod from a long bolt and clevis from Speedway Motors, Wilwood, etc. Length should allow a little wiggle room to master, 1/4" freeplay at pedal to allow the brakes to release. Do you plan remote reservoir or small Tilton/Wilwood reservoirs on the master cylinder?
I used the wilwood push rod, part # 230-6171. Got it from Summit racing:
https://www.summitracing.com/parts/wil-230-6171/overview/
I had to grind the round end down a little so that it would fit into the MC better. I was able to use the original clevis to attach the rod to the brake pedal.
https://www.summitracing.com/parts/wil-230-6171/overview/
I had to grind the round end down a little so that it would fit into the MC better. I was able to use the original clevis to attach the rod to the brake pedal.