• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

1967 SV-1725 Missing Parts

H

Henry K

Donation Time
I just bought a 1967 SV 1725 which was in pieces. I'm going through it now and have found lots of missing parts. I'd like to start with 3-side cover (tappet cover), brackets which fit under the oil pan and the pulley which bolts to the water pump). I'm sure there is more missing. Anyone have any of these? Thanks in advance.

Henry K
 
R

RootesRacer

Donation Time
Gosh I'm stumped here.

I am not aware of any item that touches both the oil pan and the water pump.

Nothing bolts to the water pump but an alternator adjustment plate.

Got a picture or a better description?
 
M

mikephillips

Donation Time
I think when he says "brackets which fit under the oil pan and the pulley which bolts to the water pump", he means the 2 braces from the bellhousing to the pan, and the water pump pulley. Not sure on the 3 side cover if he means the tappet cover.
 
H

Henry K

Donation Time
Sorry for my inartful description of the parts I was seeking. The first item was the tappet cover (I had seen it referred to as a side cover so I used both designations in my post.) The second item was the fan pulley (I mentioned the water pump only to help locate the one I was referring to.) And, finally, the brackets I mentioned are bolted to the oil pan and to the bell housing.

Thanks for all of the quick responses. I am new to this site but am enjoying it immensely.

Henry
 
Mikeflbmer

Mikeflbmer

Bronze Level Sponsor
parts

Henry K said:
Sorry for my inartful description of the parts I was seeking. The first item was the tappet cover (I had seen it referred to as a side cover so I used both designations in my post.) The second item was the fan pulley (I mentioned the water pump only to help locate the one I was referring to.) And, finally, the brackets I mentioned are bolted to the oil pan and to the bell housing.

Thanks for all of the quick responses. I am new to this site but am enjoying it immensely.

Henry
Click to expand...

I most likely have the parts you need...email me at mikeflbmer@yahoo.com
 
You must log in or register to reply here.
Top