• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Search results

  1. 90days

    Convertible Top Recommendations ?

    Looking for some opinions and recommendations for a convertible Top for my 1966 SV. There are several venders who offer tops and this is as some would say, my first rodeo with convertible tops. Any suggestions on venders or material type would be greatly appreciated. Thanks Tony
  2. 90days

    Sunbeam Alpine longer wheel studs

    I found and purchased these longer wheel studs from a vendor on ebay in the United Kingdom. They are pricey but they saved me having to re-drill my hubs to accept a different knurling. I just wanted to pass on this information to anyone looking for longer wheel studs with the correct knurling...
  3. 90days

    Sparkplugs 2.8L V6

    Looking for some input on sparkplugs for the 2.8L V6. I was wondering if anyone had any decent results with a particular type of plug and or brand. Thanks Tony
  4. 90days

    Hood Latch Pin

    Looking for an Alpine Series V Hood Latch Pin & Spring.
  5. 90days

    Mustang II 2.8 V6 Used Flywheel

    I was searching for a Mustang II 2.8 V6 flywheel and found one. I was later contacted from a guy who stated he also had a used Flywheel. If you’re interested, he’s asking $100.00 plus shipping. This is his e-mail contact(secondgenerationmustang@comcast.net). His name is Gary Baum, I don’t know...
  6. 90days

    Cars for Sale on Craigs List Atlanta

    http://atlanta.craigslist.org/nat/cto/5841645530.html http://atlanta.craigslist.org/atl/cto/5832270862.html
  7. 90days

    Parts on Craigs List Chattanooga,TN

    For sale some Sunbeam Alpine parts (Mk1/Mk 2 1959, 1960). Parts available: - Windshield frame - Speedometer (Jaeger - 120 mph) - Tachometer (Jaeger - 6,000 RPM) - Oil pressure gauge (Jaeger) - Both exterior door handles, including the locks (nice driver condition, no pitting) -...
  8. 90days

    Rear Leaf Springs Bushing Size ?

    I just received new Rear Leaf Spring Bushing from Victoria British yesterday for my 1966 V Series Alpine and I was comparing them to the old Bushings. My original stock Bushing are approximately 2 ½ “long and the replacement Bushing Victoria British sent me are only 2†long (Part # 5-3205)...
  9. 90days

    2.8L V6 Main Bolts with a Stud?

    I just sourced an Oil Pan and Oil Pickup screen from a 1984 Bronco II 2.8 along with the two Studded Main Bolts that support the Oil Pickup Screen. The Main bolts from the Bronco are about ½†longer then the Main Bolts from 1974 Mustang II bolts and will not seat properly. Is there a fix or...
  10. 90days

    Hub Puller

    I’m just checking on the Hub Puller status and who is next in line to borrow it? I’m ready to pull my hubs and only need it for a day and will expedite back promptly. I would appreciate any updates on it status. Thanks Tony
  11. 90days

    Weber Intake Manifold for 2.8l V6

    How about three Weber carburetors for your 2.8L V6 engine? http://www.burtonpower.com/inlet-manifold-3xdcnf-weber-carbs-ford-2-8-v6-taunus-cologne-tv1444tw.html
  12. 90days

    1977 Mustang II 2.8l v6 Engine for sale

    Found on Craig’s List, Atlanta, Ga. No affiliation http://atlanta.craigslist.org/wat/pts/5390382388.html
  13. 90days

    1978 Ford 2.8L V6 Engine for sale

    Engine for sale in East Islip, New York. Posted on eBay http://www.ebay.com/itm/111821131798?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
  14. 90days

    Free 1976 Mustang II 2.8L V-6 Engine

    Free engine listed on Craig List in Alpharetta, Ga. North of Atlanta Ga. http://atlanta.craigslist.org/atl/zip/5275846565.html running engine from a 1976 Mustang II. 75,000 miles. Includes starter, alternator, carburetor, exhaust manifolds and engine mounts. I pulled this motor to install...
  15. 90days

    Ford Capri V6 Lifter Set Cologne 2.6L 2.8L Lightened

    Found this listed on eBay wondering if anyone has used these lightened lifters in their 2.8L engines? I believe the 2.8L and the Ford FE engines share comparable mechanical lifters? http://www.ebay.com/itm/280603007060?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX
  16. 90days

    Mustang II 2.8l Bell Housing ????

    I found this listing on e-bay. 1974-78 Ford Mustang II 2.8L V6 Aluminum 4 Speed Bell Housing D4ZA-6394-AD. looking at the pic's the starter bump is on the passenger side. It looks wrong for the 2.8l conversion with the T-5 transmission. Need some help identifying this bell Housing. Thanks...
  17. 90days

    1966 V Complete Engine & Transmision

    Heading to the Dark Side. I have a complete 1966 V 1725cc engine and transmission for sale. I was originally planning on rebuilding this engine, but I am feeling the force and need for American Horsepower. The engine is disassembled and cleaned, the bore and crank are still standard size. The...
  18. 90days

    1725 HC Piston

    Looking for a standard size 1725 high compression piston, Thanks Tony
Top