-
Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.
If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.
Enjoy.
sunny67's latest activity
-
Whether you fit it yourself or get it done professionally make sure that whoever does it is familiar with Alpine soft tops and how to... -
This is where mine was shooting out when there was debris in the inlet valve. I would think it is the easiest path out. Rick
-
sunny67 replied to the thread Carb advice needed.May have found it. It’ll take a few days of not leaking to be sure. I replaced the needle valve for the third time. The engine fired...
-
sunny67 replied to the thread Carb advice needed.After setting up cameras and lights so I can see the bottom half better, I now see it’s gas is coming out a number of places around...
-
Shouldn't you remove the spark plugs as well for a compression test?
-
sunny67 replied to the thread Carb advice needed.I did not prop the carb piston up. I’ll do that and try again. it makes since that it would lower the reading. I don’t think the PO had...
-
sunny67 replied to the thread Carb advice needed.I lowered the fuel pressure and I’ll see if it will solve to problem. It doesn’t always leak so time will tell. It just seems that 2.25...
-
-
I have a 67 Alpine that’s pretty much stock for everything but the motor. The PO installed a later model 1.7 Sunbeam motor with a single...
-
-
sunny67 replied to the thread Dashboard switch installation.Thanks Mike. I now have one heading my way.
-
Is there a special tool or technique to tightening the slotted nuts on the dashboard switches? Every time I try a flat blade...
