• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

Recent content by alanlindafla

  1. alanlindafla

    Brake Master Cylinder Series V

    I have a Series V that appears to have a modified or replacement Brake Master Cylinder. It has the number imprinted on it 81A-7326. Is anyone familiar with this, can I put a more modern replacement, or should I send it out for rebuild. I really do want to repair it quickly as this is my wife’s...
  2. alanlindafla

    Master Cylinder and Slave for Series V

    Well I have given up on VB and hoping someone can tell me where to buy a Class "A" quality Master and Slave Cylinder for my Series V. I have rebuilt it with the so called kit from VB but she still has some bleed and fluid loss. I found once a company in Austria I think, that has original...
  3. alanlindafla

    Upper control arm

    Thank you for the advice, now i need to figure out how to maintain the hold with out the grooves. I am bringing it to a machine shop today. I took my calipers and the measurement was definitely off on the ball joint to the sleeve. over a centimeter. That is how I knoked the sleeve off, pressing...
  4. alanlindafla

    Upper control arm

    :eek: I have every thing back together on the front suspension except the “Upper Ball Jointâ€, like the rear spring question posed before me, my Ball Joint will not go all the way down. I have tried to lightly file down the sleeve as well as the Ball Joint, but it does have small inter locking...
  5. alanlindafla

    series 2 wheels

    I have a set of 4, let me know if you are still looking.
  6. alanlindafla

    Upper A Arm for Series V

    Ft. Lauderdale, FLA My email is alanshankman@bellsouth.net Email me with how much you need for it with shipping to zip code 33317
  7. alanlindafla

    Upper A Arm for Series V

    I am looking for an Upper A Arm for my Series V, believe it or not it cracked and took out my new tire and tube.:(
  8. alanlindafla

    2007 Concept Cars

    Dr. No Yes that is a scene from "Dr. No"
  9. alanlindafla

    Rebuilding the Clutch Master and Slave Cyl

    Thank You Thanks never had such great detail in a reply. I will attempt to rebuild the clutch, whats the worst that can happen, my wife not be able to shift out of gear:eek: , I can always rebuild the V again. Alan:)
  10. alanlindafla

    Rebuilding the Clutch Master and Slave Cyl

    It seems that my clutch cylinders need to either be replaced or rebuilt on my SV. Has anyone done this, and is it simple, or should I attempt to buy rebuilt. I cannot find a schematic on the rebuild, so I am a little apprehensive on doing it myself. Any suggestions?
Top