• Welcome to the new SAOCA website. Already a member? Simply click Log In/Sign Up up and to the right and use your same username and password from the old site. If you've forgotten your password, please send an email to membership@sunbeamalpine.org for assistance.

    If you're new here, click Log In/Sign Up and enter your information. We'll approve your account as quickly as possible, typically in about 24 hours. If it takes longer, you were probably caught in our spam/scam filter.

    Enjoy.

2.8 V6 Mustang II Head Exhaust Modification ( 20170217_130507) by DanR
20180308_144302
20180308_144257
20180308_144246
2.8 V6 Mustang II Head Exhaust Modification ( 20170217_130507) by DanR
Engine Mounts 20170113_165304
Engine Mounts 20170113_165919
Engine Mounts 20170113_165955
DanR

2.8 V6 Mustang II Head Exhaust Modification ( 20170217_130507) by DanR

Emission holes under the exhaust ports; drill & tap 10 mm 1.5 threads matching stock bolts; A means of ensuring against exhaust leakage. Prior thought (Jose) was to "not tighten the top bolts because they would separate bottom causing exhaust leakage, now no problem with this modification:)
Click to expand...
DanR
Tap and use the threaded plugs in the emission holes, then cut off and ground smooth to match the exhaust port head surface. Once this is done, drill and tap with 10mm 1.5 tap to a depth of no more than 3/4"
 

Media information

Category
DarkSider Gallery
Added by
DanR
Date added
View count
1,207
Comment count
1
Rating
0.00 star(s) 0 ratings

Image metadata

Device
samsung SM-G360V
Aperture
ƒ/2.6
Focal length
3.3 mm
Exposure time
1/30 second(s)
ISO
80
Filename
20170217_130507.jpg
File size
714.5 KB
Date taken
Fri, 17 February 2017 1:05 PM
Dimensions
1600px x 1200px

Share this media

Top